Tarp: Mountain Laurel Designs Cuben SoloPro - 5-1/8oz (146g) with guylines
The tarp is a minimalistic design. Its a cuben fiber tarp cut long and narrow with a bonded ridgeline for 100% water tight protection. Due to its narrow design, a hard rain could get under the tarp and onto my bag. That where the Superlight bivy comes in.
Bivy: Mountain Laurel Designs Superlight Bivy - 7-7/8oz (225g)
The bivy is the larger size that MLD makes with the full mesh hood to minimize condensation in our typically humid weather. The Momentum fabric top is a water resistant breathable fabric that will keep any rain coming under the tarp from wetting out my down quilt. It also has a foot box made out of Epic fabric to help with condensation.
Poles: DAC 8.84mm OD Poles - 3-1/8oz (88g)
On hiking trips I use my trekking poles as the tarp supports. Obviously I won't have those on my bikepacking trips so I salvaged some DAC poles from an old tent. I selected different sections to adjust the length to work well with the tarp. I like to pitch the tarp low and wide for weather protection and to keep the support poles short, light and stiff. The rear pole is only two sections (23in) and the front pole is three sections (36in).
Tarp & bivy set up with Thermarest PL3
Front view of the tarp - set up low and wide
Plenty of weather protection with the bivy & tarp
Bivy alone with PL3 for size reference
Yellow ceramic coated stakes are great - very easily spotted in leaves
Low volume even without being packed efficiently
